Split controller prevents magnetic interference with the access control unit to prevent unauthorized entry into the building.

Features
• Accept power from a 12 or 24 Volt AC/DC supply
• Up to 1,000 user codes (000~999) programmable for output#1 and 10 (00~09) for output#2
• 2 Form C relays, each rated 10A@30VDC
• Each relay has programmable output time from 1~99 seconds or toggle
• Output #2 can be programmed for use with a door bell
• 2 Egress inputs for exiting the premises without keying in the code
• Split controller installation protects the keypad access from magnet tampering
• Tactile key feel and blue backlit 3×4 keypad for easy nighttime use (For DG-700/760)
• All features are programmed entirely from the keypad.
• Non-volatile EEPROM protects codes and instructions in case of power loss
• Tamper contact for added security (N.C. Dry contact, 100mA@12VDC max.)
• High strength design, epoxy potted, fully sealed within a zinc alloy housing
• Built-in RFID proximity reader

Programming Instructions
1. Codes are programmed to be 4~6 digits in length. All codes must be the same length.
2. Before inputting any of the following, enter Programming Mode by entering the Master Code twice.
The default master code is 1234.
To enter Programming Mode, enter 1 2 3 4 1 2 3 4
3. To exit Programming Model, press the # key.
4. The keypad will exit Programming Mode if no keys are pressed for 30 seconds.